Welcome to our frequently asked questions page. Here we hope to answer any questions that you may have regarding your electrical needs at the Farnborough Airshow.
Should you require any further information, please contact us via our contact form.
How do I order electrical supplies for the Farnborough Airshow?
Ordering for electrical mains supplies for the Farnborough Airshow 2012 is carried out through the online portal E-Net. All exhibitors will have registered and paid for their space with Farnborough International through the E-Net system. To place your order, please log on to the E-Net system. You are also able to request a quotation for additional services and work that you may require on E-Net, including supplies to outside exhibits.
Once your order is placed and after a quick approval process you will be notified to pay and complete your order. Please note that payment is due on approval.
How do I get an E-Net login?
If you are contracting or acting on behalf of an exhibitor you will need to be nominated by the exhibitor within the E-Net system in order to use the system and make a purchase. Further details can be found on the E-Net login page.
When is the deadline for my electrical supply order & why is there a surcharge?
Orders placed after the 27th April are subject to a surcharge. There are two reasons behind this. Firstly, an immense amount of design work has to be carried out prior to the installation of the cabling infrastructure onsite. All of the ordered supplies and sizes are calculated, designed and installed as a complete package.
Secondly, the chalets and halls in particular are fitted with a suspended floor - the installation of which is programmed in at the start of the show build-up in March. In order to install the cabling, it must be carried out prior to the flooring being installed.
Any orders that arrive after these processes are extremely difficult to install, if not impossible. In some cases when a supply has not been ordered, to ensure an exhibitor is not left without any power at all the organisers will select a supply.
I have booked a Shell Scheme stand, what electricity do I get as part of my package?
The stand erecting contractors provide the Shell Scheme stands to Farnborough, complete with the electrics installed. Additional socket outlets and lighting may be ordered directly with Melville.
Does the lighting and power stay on all the time?
It all depends on where you are. Please see below:
Halls - The lighting in the halls is switched to a lower level during the course of the night and the power to all areas switched off completely for safety reasons. Only those exhibitors who have purchased a 24 hour supply will have any power overnight. You can order a 24 Hour supply on the the E-Net system or by visiting our site office during the show.
Chalets – The power and lighting is left on 24 Hrs, please note power to air conditioning supplies is turned off overnight.
Why do I need to order a separate Air Conditioning supply?
The electrical infrastructure at Farnborough although extensive, does have its limits. As the show is in July it is impossible to predict the temperatures expected each year and in turn, the level of air conditioning the exhibitors require. Due to some problems experienced in previous years, Farnborough's organisers have stipulated that any air conditioning may only be served from a generated supply. The only way of ensuring this is to install a separate supply to those exhibitors who require air conditioning. Please note if you are found to be using the mains power to run your air conditioning supply, additional charges may be incurred over and above the purchase of an additional supply. Please do not be tempted to run your air conditioning from a non-air conditioning supply - as part of the installation process we will need to inspect your installation.
We require some additional electrical work to our stand or chalet, can RME help?
RME are able to provide quotations for all electrical works at Farnborough. We have a dedicated team on site from March through to August so we are on hand to carry out any pre-booked installation work. For your own peace of mind, any installation work that RME carry out directly for a client will be looked after by our dedicated on site team throughout the build-up and show itself a valuable advantage when utilising RME's services. Please contact us via E-Net for a quotation, or alternatively contact us by email at email@example.com.
Our stand or chalet has been wired by another contractor. Who do I turn to if I have a problem at the time of the show?
You should ensure that the contractor who carried out your work is on hand to rectify any problems for you. RME will be on site for our customers and Farnborough's organisers directly. We may be able to assist you on the day however we are unable to guarantee we will be available as our customers must come first.
We do, however, offer an opt-in maintenance service to provide specialist assistance during the show to rectify any faults that may occur on a stand or chalet for an extra charge. This service covers fault finding and resetting of equipment installed and signed off prior to the show, as well as replacement of lamps that may fail. Any parts required or excessive time needed due to poor workmanship would be chargeable separately.
Access to this priority service is restricted, a dedicated telephone number is provided to the exhibitor once enrolled and we aim to attend within 15 minutes.
Please visit our online shop for more information.
What will be provided at the exhibitor end of the electrical power supply on a stand, chalet or OE area?
Up to 125amp supplies:
You will be provided with a cable terminated to a Cee form socket. You will require a Cee form plug to connect to your equipment which we will stock on our onsite shop for purchase in our shop.
Over 125 amp supplies:
You will be provided with a Steel Wired Armoured (SWA) cable (bare ends). We will not provide glands, Cee Form sockets or isolators. These should be provided by your fit out contractor. RME are able to provide this service at an additional cost. Please contact us for a quotation.
For any other information, please do not hesitate to contact us via our contact form.